Amsoil Severe Gear (75W-110) Gear Lube (SVT)

Amsoil Severe Gear (75W-110) Gear Lube (SVT)
Data Bulletin ⭳

Product Highlights

Formulated for the severe operating conditions of today’s pick-up trucks, SUVs, heavy equipment and other hard-working vehicles.

Amsoil Severe Gear® Synthetic Extreme Pressure (EP) Gear Lube is a premium-grade gear oil specifically engineered for maximum performance in severe-duty applications. This state-of-the-art Amsoil formulation features an exclusive blend of high-viscosity, shear-stable synthetic base oils and an extra treatment of high-performance additives. Amsoil Severe Gear Synthetic EP Gear Lube maintains its viscosity for long-lasting protection against metal-to-metal contact. The proprietary Amsoil additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring. Amsoil Severe Gear helps prevent “thermal runaway” — a phenomenon caused by a lubricant’s inability to control friction and increased heat under high-stress conditions. By controlling thermal runaway, Amsoil Severe Gear Synthetic EP Gear Lube inhibits rapid lubricant degradation and component damage. Equipment runs better and lasts longer with Amsoil Severe Gear Synthetic EP Gear Lube.

Performance

Amsoil Severe Gear provides performance beyond that possible with conventional gear oil. This Amsoil custom product offers superior gear and bearing protection, better friction and heat reduction, increased efficiency and extended service life.

Temperature Extremes

Amsoil Severe Gear EP Gear Lube excels in hot and cold temperature extremes. By design, it resists breakdown from high heat, preventing acids and carbon/varnish formation. Its wax-free construction also improves cold-flow properties, improving fuel economy and cold-weather shifting.

Package Sizes (SVT)

Code Sizes Units
SVTQT (SVTQT-EA) 1-Quart Bottle Each
SVTQT (SVTQT-CA) 1-Quart Bottle Case of 12
SVT1G (SVT1G-EA) 1-Gallon Each
SVT1G (SVT1G-CA) 1-Gallon Case of 4
SVTTP (SVTTP-EA) 2.5-Gallon Each
SVTTP (SVTTP-CA) 2.5-Gallon Case of 2
SVT05 (SVT05-EA) 5-Gallon Pail Each
SVT16 (SVT16-EA) 16-Gallon Keg Each
SVT30 (SVT30-EA) 30-Gallon Drum Each
SVT55 (SVT55-EA) 55-Gallon Drum Each
SVT27 (SVT27-EA) 275-Gallon Tote Each

Applications

Amsoil Severe Gear Synthetic EP Gear Lube is excellent for severe applications, such as towing, hauling, steep-hill driving, commercial use, plowing, racing, off-road use, rapid acceleration, frequent stop-and-go operation and high ambient temperatures. Higher horsepower, towing and hauling capabilities of modern vehicles make turbo-diesel pick-ups, SUVs, vans and delivery/utility vehicles especially prone to severe service. Other severe-duty vehicles include light, medium and heavy-duty trucks, buses, heavy equipment, 4X4s, tow trucks, race cars, tractors and motor homes.

Performance Features

  • Superior Film Strength
  • Controls Thermal Runaway
  • Rust and Corrosion Protection
  • Helps Reduce Operating Temperatures
  • Maximum Efficiency
  • Long Oil, Seal & Equipment Life

For product service life in differentials, consult your owner’s manual or the Original Equipment Manufacturer (OEM) to establish the application, NORMAL or SEVERE.

For product service life in non-differential applications, consult owner’s manual or the OEM for either normal or severe synthetic oil service intervals. Where service intervals are unavailable, drain at twice the interval for conventional oil.

Gear oils should be changed more frequently when operating vehicles or equipment in dusty or dirty conditions, unless the gear system is properly sealed and equipped with membrane-type breathers.

Service Intervals

  • Cars, SUVs, Light Trucks
    • Normal Service – Drain at 100,000 miles of service or according to the owner’s manual, whichever is longer.
    • Severe Service – Drain at 50,000 miles of service or according to the owner’s manual, whichever is longer.
  • Heavy Duty Class 8 Line Haul – Follow the OEM drain interval (miles or hours) for synthetic oil up to 250,000 miles or three years, whichever comes first.
  • Vocational/Delivery – Follow the OEM drain interval (miles or hours) for synthetic oil up to 120,000 miles or three years, whichever comes first.
  • Heavy Duty Off-Road – Follow the OEM drain interval (miles or hours) for synthetic oil up to 100,000 miles or two years, whichever comes first.

Note: Amsoil does not support extended drain intervals where water contamination occurs. Check and service the gear oil frequently when water contamination is possible.

Recommended for use in differentials, manual transmissions and other gear applications requiring any of the following specifications: API GL-5, MT-1, MIL-PRF-2105E, Dana SHAES 234 (Formerly Eaton PS-037), Mack GO-J, or the differential (hypoid) gear oil specifications from all domestic and foreign manufacturers such as GM, Ford and Daimler Chrysler. Can also be used in axles where an API GL-4 lubricant is recommended.

AMSOIL Severe Gear (75W-110) provides superior performance and replaces competitors’ 75W-110, 80W-110 and 85W-110 gear oils. Use where these viscosities are required by OEMs and where maximum viscosity protection is needed for extreme severe-duty applications.

Amsoil Severe Gear is compatible with conventional and synthetic gear oils. Mixing Amsoil gear oil with other oils, however, will shorten the oil life expectancy and reduce the performance benefits. Amsoil does not support extended drain intervals where oils have been mixed.

Aftermarket oil additives, other than those specified by Amsoil, are not recommended for use with Amsoil gear oil.

Amsoil Severe Gear is compatible with most limited-slip differentials. If limited-slip differential chatter occurs, add Amsoil Slip Lock® friction modifier additive.

Amsoil Product Warranty

Amsoil products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.

TYPICAL TECHNICAL PROPERTIES
Amsoil Severe Gear (75W-110) Gear Lube (SVT)
Kinematic Viscosity @ 100˚C, cSt (ASTM D445) 20.9
Kinematic Viscosity @ 40˚C, cSt (ASTM D445) 139.9
Viscosity Index (ASTM D2270) 174
Pour Point ˚C (˚F) (ASTM D97) -44 (-47)
Flash Point ˚C (˚F) (ASTM D92) 216 (421)
Brookfield Viscosity @ -40˚C, cP (ASTM D2983) 102,100
Foam Stability (ASTM D892) 0/0, 20/0, 0/0
Copper Corrosion 3 hr, 121˚C (ASTM D130) 1B
Falex Procedure B (ASTM D3233) (failure load, lbf.) >3500

*All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are developed by Amsoil for use in the applications shown.

Leave a Reply

Your email address will not be published. Required fields are marked *